Maintenance Of Remote Control; Battery Information - Boss Audio Systems RDS740UA User Manual

MAINTENANCE OF REMOTE CONTROL

An insulation tag was installed in your remote by the manufacturer to prevent the
battery from draining. Removing the tag from the remote before using.

BATTERY INFORMATION:

Lithium Battery: CR2025 3V
Battery Life: Approximately 6 months.
Replacing the Battery from the Remote Controller:
1) Remove the battery holder by pressing the locking tab with your thumb
and pulling it out.
2) Replace the battery with the same type and the "
3) Gently push in the holder until securely locked into place.
WARNING:
Do not recharge, disassemble or dispose of in fire.
Battery leakage may cause damage to the unit.
To avoid the risk of accident, keep batteries out of reach of children.
+" side facing up.
B
A
+ side up
11
3. To select next or previous track to play
Under USB or disc mode, press the >>| button to select next track to play.
Press the |<< button within 1 seconds after selecting a track to select the previous
track to play. Press the |<< button 1 seconds later after selecting a track to select
the current track and play from the beginning of the current track.
4. To select next or previous 10 track to play for USB or MP3/WMA
Under USB or MP3/WMA mode, short press M6 or M5 button to select next or
previous 10 TRACK during normal play.
5. To play fast forward or backward
Under USB or disc mode, during playback, press the >>|/|<< button and hold to skip
forward or backward.
6. How to use the PLAY/PAUSE/TOP button
Under USB or disc mode, during playback, press PLAY/PAUSE/TOP button to pause
USB or disc playback, press again to resume USB or disc playback.
Press this button and hold for more than 0.5 seconds to play the first track of the USB
or disc.
7. To scan tracks
Under USB mode, press INT button shortly to display M-INT and play the first 10
seconds part of each track of all.
Under CD/MP3/WMA disc mode, press INT button shortly to display S-INT and play
the first 10 seconds part of each track of all.
Under USB or MP3/WMA disc mode, press INT button long to display D-INT and play
the first 10 seconds part of each in current folder.
Under INT mode, press INT button again to stop INT mode and retain playing the
track currently selected.
8. To repeat track(s)
Under USB mode, press RPT button shortly to display M-RPT and play the current
track repeatedly.
Under CD/MP3/WMA disc mode, press RPT button shortly to display S-RPT and play
the current track repeatedly.
Under USB or MP3/WMA disc mode, press RPT button long to display D-RPT and
play the current folder repeatedly.
During RPT mode, press RPT button again to cancel RPT mode.
9. To play tracks in random
Under USB mode, press RDM button shortly to display M-RDM and play the track of
all in random order.
Under CD/MP3/WMA disc mode, press RDM button shortly to display S-RDM and play
the tracks of all in random order.
Under USB or MP3/WMA disc mode, press RDM button long to display D-RDM and
play the tracks in the current folder in random order.
Under RDM mode, press RDM button again to cancel RDM mode.
8