Fiat 500 Abarth User Manual page 38

36 BLUE&ME™ User's Manual
"Delete". The system will delete the last group of num-
bers and display the partially dialed phone number.
Then, you can say the digit group again and also the
remaining phone number digits.
To cancel the phone call, say "Cancel".
To cancel the phone call and start dialing again, say
"Start over".
To ask the system to repeat the recognized phone num-
ber, say "Repeat". If no phone number was dialed, the
system says "No number available".
If the repeated phone number is correct, say "Dial" to
start the call.
NOTE: When connected to BLUE&ME™ and dialing a
phone number by voice commands, it is essential to
minimize background noise in the car and to ask the
other passengers to keep silent while you are speaking
the digits. Since the system is speaker independent, it can
also recognize other voices; there is a risk that some
numbers will be accidentally recognized, added to cor-
rect numbers or not recognized.
Dialing a phone number using the mobile phone
keypad
Alternatively, you can dial a phone number using your
mobile phone keypad and then continue your conversa-
tion using the hands-free communication system.
It is a requirement that you create a pairing relationship
and that the mobile phone is within range of the hands-
free communication system of your car.
To dial a phone number using your mobile phone key-
pad, proceed as follows:
• Dial the phone number on your mobile phone keypad
and connect the phone call following the procedure
required by your mobile phone.