Fiat 500 Abarth User Manual page 28

26 BLUE&ME™ User's Manual
/ESC to cancel the entire VR session or press the
steering wheel button, wait for the beep and say
"Cancel".
A voice interaction is a two-way communication/spoken
exchange between system and user. To initiate a voice
interaction, press the
issue a command. To interrupt a voice announcement
from BLUE&ME™ and say your reply before listening to
the entire voice announcement, press the
wheel button and speak your command after the prompt.
To stop an ongoing interaction, press the
ton. You will hear a tone indicating when voice recogni-
tion is deactivated.
The hands-free communication Help option can speak
the list of commands available to you at any time,
depending on the keyword level that you are currently
on. To use the Help system, say "Help". Listen to the list
steering wheel button and
steering
/ESC but-
of currently available commands and decide on which
command you'd like to issue to the system.
Adjust the volume of phone calls to a level that is
comfortable and safe while the car is in motion. To adjust
the default volume of BLUE&ME™ , refer to EXTERNAL
AUDIO VOL function in the Owner's Manual on the
DVD. To temporarily adjust the volume of the current
phone call, press + or – or adjust the position of the radio
knob. After the phone call is disconnected, the volume
will revert back to the original level.
You can press Vol + or Vol – buttons on the rear of the
steering wheel also to adjust the volume of the current
BLUE&ME™ voice announcement.
Please remember that to interrupt a voice announcement,
you can always press the
any time during a voice interaction and give a new voice
command.
steering wheel button at