Dialing a phone number using voice commands
To dial a phone number using voice interaction, proceed
as follows:
Press the
steering wheel button and say "Dial".
The system will respond with "Number, please".
Say the phone number as a sequence of single digits (e.g.,
"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "+" (plus),
"#" (pound) or "*" (star).
For example, 248 555 1212 has to be said as: "two, four,
eight, five, five, five, one, two, one, two".
The system will repeat the complete phone number and
display it.
If the number is complete, say "Dial" or press the
/MAIN button on the steering wheel to start the call.
If you have not finished speaking the phone number,
then say the remaining digits and then say "Dial" or
press the
/MAIN button on the steering wheel to start
the call.
The system will start the call to the displayed phone
number.
To end the phone call, press the PHONE HANG UP
button on the steering wheel.
You can say the sequence of phone number digits in
"digit groups" which allows you to verify the recognized
number in several small portions. Digit groups are cre-
ated by the pauses you use while pronouncing the
sequence of digits. If you pause after pronouncing sev-
eral digits, a digit group is created. The system will
repeat the recognized digits.
If the spoken digits are correct, you can continue pro-
nouncing the phone number. If the spoken digits are
incorrect, you can delete the digit group by saying
BLUE&ME™ User's Manual 35
1