Voice Commands - BMW 328i xDrive Owner's Manual

Communications
From hands-free system to mobile
phone
Calls being conducted using the hands-free
system can also be continued using the mobile
phone if so desired, depending on the mobile
phone.
At this point, follow the instructions that appear
on the display of the mobile phone, also refer to
the Owner's Manual for the mobile phone.
Operation by voice
With voice activation system:
Operation, refer to page 25.
Without voice activation system:
Depending upon the equipment, the mobile
phone can be voice-operated as described
below.
The list of short commands in the Owner's
Manual applies only to this type of voice activa-
tion.
The concept
> The mobile phone can be operated without
removing your hand from the steering
wheel.
> In many cases, the entry process is sup-
ported by means of announcements or
questions.
> {...}indicates commands for voice activa-
tion.

Voice commands

Activating voice activation system
1. Press the button on the steering wheel.
2. Say the command.
Finishing voice input
Press the button on the steering wheel
or
{Cancel}.
214
Telephone
Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG
Possible commands
Having possible commands read aloud
The system understands default commands
that must be spoken word for word.
{Help}.
Possible commands are read aloud.
Digits from zero to nine are recognized.
Each digit can be spoken individually or com-
bined into a sequence to accelerate the entry
process.
Using alternative commands
There are often a number of commands to run a
function, e.g.:
{Dial name} or {Name}.
Example: dialing phone numbers
1. Press the button on the steering wheel.
2. {Dial number}
The system replies: {{Please say the num-
ber}}.
For example: {123 456 7890}
3.
The system replies: {{123 456 7890. Con-
tinue ?}}
4. {Dial}
The system replies: {{Dialing number}}
Calling
Dialing phone numbers
1. {Dial number}.
2. Say the phone number.
3. {Dial}.
The connection to the desired subscriber is
established.
Correcting phone number
Digit sequences can be deleted after the sys-
tem has repeated the digits.
{Correct number}.