Subscribe to Our Youtube Channel
Related Manuals for Ashdown Fallen Angel 50 DSP Combo
Summary of Contents for Ashdown Fallen Angel 50 DSP Combo
-
Page 1: Operating Instructions
OPERATING INSTRUCTIONS Fallen Angel 50 DSP Combo Fallen Angel 100 DSP Combo & Head... -
Page 2: Important Safety Instructions
Important Safety Instructions BASIC PRECAUTIONS 10. Do not attempt to service the product. GROUNDING INSTRUCTIONS All servicing should be referred to qualified service personnel. WARNING When using electrical products, This product must be grounded (earthed). If basic precautions should be followed, it should malfunction or break down, 11. - Page 4 Fallen Angel Design Philosophy General Information: Also supplied with these amplifiers is (bit of high tech here) a dedicated 4 way footswitch These guitar amplifiers have been designed on a single jack lead (so no more fiddling to fulfil the requirements of the modern with multiway connectors).
-
Page 5: Front Panel Facilities
Front Panel Facilities INPUT - The single jack input socket perfectly indicates Channel 2 Boost. used in the channel 2 tone control network matches passive guitars with its very high have been chosen to best suit a modern, CHANNEL 2 impedance but still retains sufficient high gain, saturated guitar sound (with big headroom to cope with the output from... - Page 6 LEDs to the right of each control indicate which is active. VU METER - The VU meter indicates output power level. FALLEN ANGEL 50 AND 100 DSP COMBOS, AND 100 DSP HEAD Fallen Angel 50 DSP Combo Fallen Angel 100 DSP Combo and Head...
-
Page 7: Rear Panel Facilities
Rear Panel Facilities FALLEN ANGEL 50 AND 100 DSP COMBOS, AND 100 DSP HEAD Fallen Angel 50 DSP Combo Fallen Angel 100 DSP Combo and Head... - Page 8 Rear Panel Facilities FUSED MAINS INLET SOCKET - This is for EXTERNAL SPEAKER 8 OHMS - This is an connection to your countries mains supply external speaker socket for connecting to an using the appropriate mains cable supplied. 8 Ohm speaker such as a 2 x 12 cabinet Always use a mains outlet that has an earth (normally 8 Ohms).
-
Page 9: Specifications
Specifications FA50 DSP COMBO & FA100 DSP COMBO INPUTS Instrument Input Impedance 1M Ohm Level 100mV to 1V Effects Return Impedance 50k Ohms Level 0dBu adjustable OUTPUTS Effects Send Impedance 4.7k Ohms Level Nominal 0dBu Speaker Emulated Line Output Impedance 4.7k Ohms Level Nominal 0dBu EQUALISATION Treble... - Page 10 Nor does it apply to normal wear and tear of parts such as valves, fuses, light bulbs, speakers, controls etc. Please complete the lower section of this warranty and return it within 10 days of purchase to Ashdown Engineering Ltd. at the above address. In the unlikely event of any defect, please contact an authorised Ashdown Engineering dealer.
- Page 11 www.ashdownmusic.com...
Need help?
Do you have a question about the Fallen Angel 50 DSP Combo and is the answer not in the manual?
Questions and answers