Reebok 1910 Treadmill Manual page 23

If desired, adjust the volume by pressing the Vol
increase and decrease buttons on the console.
To pause the workout, touch one of the menu but-
tons or press the Stop button on the console. To
continue the workout, touch the Resume button or
the Start button. To end the workout session, touch
the End Workout button.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate moni-
tor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately. For information about the chest
heart rate monitor, see page 17.
Before using the handgrip heart rate monitor,
remove the sheets of plastic from the metal con-
tacts. In addition, make sure that your hands are
clean.
To measure your
heart rate, stand
on the foot rails
and hold the
contacts with
your palms for
approximately
ten seconds;
avoid moving
your hands.
When your pulse
is detected, your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the con-
tacts for about 15 seconds.
Contacts
23
7. Turn on the fan if desired.
The fan features several speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the Man. fan button
to turn on the fan and to
increase the fan speed.
If you press the Man. fan
button once while the fan is
on its maximum speed setting, the fan will turn off.
Press the Auto fan button to turn on the auto mode
or to turn off the fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the walking platform and touch the home
button or the back button on the screen or press
the Stop button on the console. A workout sum-
mary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’'s electrical components may
wear prematurely.