Ariston microGENUS II 24 MFFI Installation And Servicing Instructions page 45

6.5.10 Removing the D.H.W. temperature sensor
(N.T.C.)
1. Pull off the electrical connector and unscrew the
sensor probe using a suitable spanner (F
6.5.11 Removing the diverter valve actuator
1. Unplug the electrical connector "M1" (F
2. Release the retaining clip "N1" and remove the divertor
valve actuator
. 6.64).
IG
F . 6.64
IG
. 6.65);
IG
M1
N1
F . 6.65
IG
6.5.12 Removing the D.H.W. flow switch
1. Unplug the electrical connector "O1" (F
2. Remove the D.H.W. flow switch using a screwdriver
(F . 6.67-6.68).
IG
. 6.66);
IG
O1
F . 6.66
IG
F . 6.67
IG
F . 6.68
IG