Alpha CombiMax 2kW Installation And Servicing Instructions

Immersion heater kit suitable for use with the combimax 350 and 600 unvented hot water store

Installation and Servicing

Instructions

Alpha CombiMax

2kW Immersion Heater Kit

Suitable for use with the

CombiMax 350 and 600 Unvented Hot Water Store

Immersion heater kit - Part No. 1000462

For Technical help or for Service call ...

ALPHA HELPLINE

Tel: 0870 3001 964

Nepicar House, London Road,

Wrotham Heath, Sevenoaks,

Kent TN15 7RS

These instructions must be used in conjunction with the Installation instructions provided

with the selected combination boiler and CombiMax.

Leave these instructions with the User

Table of Contents

Do you have a question about the Alpha CombiMax 2kW and is the answer not in the manual?

Page 1: Installation And Servicing
Installation and Servicing Instructions Alpha CombiMax 2kW Immersion Heater Kit Suitable for use with the CombiMax 350 and 600 Unvented Hot Water Store Immersion heater kit - Part No. 1000462 For Technical help or for Service call ... ALPHA HELPLINE...
Page 2: Electrical Supply
The Alpha Immersion Heater is for use with the Alpha CombiMax 350 and 600 unvented secondary hot water storage cylinder and must be obtained from Alpha Therm Ltd. (Immersion heater kit Part No. 1000462). It's purpose is to deliver a limited amount of hot water when the boiler is not working.
Page 3: User Information
Fit a new thermostat and re-assemble in reverse order. IMMERSION HEATER Drain the CombiMax as described in section 8.2 in the CombiMax instructions. Remove the old heater and fit a new one as described in section 3 of these instructions. Alpha CombiMax Immersion Heater...
Page 4 These instructions have been carefully prepared but we reserve the right to Nepicar House, London Road, Wrotham Heath alter the specification at any time in the interest of product improvement. © Alpha Therm Limited 1999. Sevenoaks, Kent TN15 7RS email: info@alphatherm.co.uk website: www.alpha-innovation.co.uk...