Alpha RS005 Manual

Alpha RS005 Manual

Motion sensor

Advertisement

Quick Links

Cannot be used in conjunction with a sun/wind sensor.

1. TECHNICAL DATA

Battery: 2 x AAA
Protection Index: IP44
Frequency: 433.92MHz

2. THE PARTS

I
ndicat
or
light
Sensitivity switch
Mounting B s a e

3. INSTALLATION

Opening the unit
Slide in different directions
to seperate from mou ting base
Installation: Firstly, find a suitable position on the front bar of the folding arm awning to house the
motion sensor. This position should not obstruct the operation of the awning and should ideally allow
the motion sensor to be secured to the hollow channel and be close to either end. Mounting near the
center will affect the quality of operation. The device can be mounted on either the front, back or
underside of the bar as circumstances allow.
RS005 MOTION SENSOR GUIDE p1
ALPHA SUPPORT PHONE (909) 307-2320
L
earni
ng
button
A A bat
A
Orientation switch for front back or
underside installation
Shown in front back
Channel f x i ings
n
Working current: 8mA
Temperature: -20
ter x 2
y
/
/
Circuit Board
Contains clips onto the
mounting base
Remove two screws
by screwdriver
to +60
Outer Cover
Lift outer cover from
circuit board

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RS005 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alpha RS005

  • Page 1 RS005 MOTION SENSOR GUIDE p1 ALPHA SUPPORT PHONE (909) 307-2320 Cannot be used in conjunction with a sun/wind sensor. 1. TECHNICAL DATA Battery: 2 x AAA Working current: 8mA ℃ ℃ Protection Index: IP44 Temperature: -20 to +60 Frequency: 433.92MHz 2.
  • Page 2 RS005 MOTION SENSOR GUIDE p2 ALPHA SUPPORT PHONE (909) 307-2320 Underside Mount Mount NOTE: Make sure to select the correct switch position on the circuit board for the mounting position used. This is a crucial step, as incorrect switch position will render the unit unreliable or inoperable.
  • Page 3 If not, change the direction of operation and reset the motor limits as per the motors instructions. This step is crucial as the Alpha motion sensor will only work this way and damage to the awning may occur if this is not correct.
  • Page 4 10. SAFETY FUNCTION When connected to the Alpha Cassette awning or Universal motor, the motion sensor will send a signal to the motor several times an hour to let the motor know it’s still protecting the awning. If the motor does not receive this signal for a period of one hour after being opened, it will close automatically as a protective measure.
  • Page 5 RS005 MOTION SENSOR GUIDE p5 ALPHA SUPPORT PHONE (909) 307-2320 11. CHANGING MOTION SENSOR BATTERIES (please give this page to your customer) Replace every 12 months OR if the awning closes after half an hour and it’s not windy. 1. Slide off the outer cover sideways, it might move in either direction.

Table of Contents