Security; Outgoing - Sagem 1201 Reference Manual

5 - Information / Configuration
5.8.3

Security

This menu contains 2 sub-menus:
•
Outgoing (cf. § 5.8.3.1),
• Incoming (cf. § 5.8.3.2).
5.8.3.1

Outgoing

Object: This menu is used to create outgoing IP filters to refuse data from the LAN to the WAN
and list the existing outgoing IP filters.
By default, all the outgoing data is accepted.
•
Select the Outgoing
display the following screen:
Field
Filter Name
Protocol
Source Address / Mask
Source Port
Dest. Address / Mask
Dest. Port
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 5-40 Sagem Communication document. Reproduction and disclosure prohibited
sub-menu in the Security
Name of the filter.
Transport protocol.
Source IP address / Subnet mask.
Source port
Destination IP address / Subnet mask.
Destination port.
menu in the Advanced Setup
Meaning
section to