Installation On The Ethernet Port - Sagem 1201 Quick Installation Manual

SAGEM F@st™ 1201/1241 V2

3.1 InSTALLATIon on ThE EThERnET poRT

if you selected «Use the Ethernet
cable», click on next.
follow the instructions provided by the
install screens by pluging in the modem
supply, switching it on and connecting the
adsl line and then connect the
modem to your computer using the
yellow ethernet cable.
once you have made these connections,
an internet connection screen will appear.
you must enter your username then your
connection password.
this information is provided by your Internet Service provider (isp).
Once you have entered the configuration
parameters, a window will appear listing
the different steps in the installation.
once all these steps are complete, an
end of the installation window will appear
telling you that your modem has been
correctly installed.
Click on finish.
you may now use your internet access.
the "http://sagem-communications.com"
site will open.
Installation from the CD-RoM

253156400-A_GIR 1201 V2 STD-gb.i8 8 14/10/2008 16:59:58