Bosch NDC-265-P Installation And Operation Manual page 58

200 series ip camera
Hide thumbs Also See for NDC-265-P:
Table of Contents

Advertisement

58
en | Advanced Mode
4.
5.
Note:
If older recordings are not allowed to be overwritten when the
available memory capacity has been used, the recording in
question is stopped. Specify limitations for overwriting old
recordings by configuring the retention time.
Formatting Storage Media
Delete all recordings on a storage medium at any time. Check
the recordings before deleting and back up important
sequences on the computer's hard drive.
1.
2.
3.
4.
Deactivating Storage Media
Deactivate any storage medium from the Managed storage
media list. It is then no longer used for recordings.
1.
2.
AR18-10-B012 | v1.5 | 2011.01
Check the box in the Rec. 1 or Rec. 2 column to specify
which data stream should be recorded on the storage
media selected. Rec. 1 stores stream 1, Rec. 2 stores
stream 2.
Check the boxes for the Overwrite older recordings
option to specify which older recordings can be
overwritten once the available memory capacity has been
used. Recording 1 corresponds to stream 1, Recording 2
corresponds to stream 2.
Click a storage medium in the Managed storage media list
to select it.
Click Edit below the list. A new window opens.
Click Formatting to delete all recordings in the storage
medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list
to select it.
Click Remove below the list. The storage medium is
deactivated and removed from the list.
Installation and Operation Manual
IP Camera 200 Series
Bosch Security Systems

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents