Playback; Playback On Tv (Or Vcr) With; Audio/Video In Jacks - GE CG400 User Manual

Playback

The basic playback features are described in this section of the manual. Before you
can use these features, you must attach your camcorder to a TV (or VCR) to view the
playback. Check order form on page 5 for optional accessories.

Playback on TV (or VCR) with

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you need an audio/video cable and maybe a Y-adapter. If your TV is already
connected to a VCR, just attach the camcorder to the VCR.
STOP PAUSE BLANK
REW PLAY F.FWD EJECT
* Optional accessories are available from your dealer, local electronics store, or mail order. Order form is on page 5.
Playback Operation
1. Camcorder connected to TV:
Turn on the TV and tune it to the
video input channel.
Camcorder connected to VCR that
is connected to TV:
Turn on VCR and place it in the "line"
or "camera mode". (If your VCR does
not have a "line" or "camera mode",
consult the VCR owner's manual.)
Operate the TV as you normally do to
see the signal coming from the VCR.
2. Attach a power supply and turn on the
camcorder.
3. Insert a tape.
22
Video Jack
V
A
Audio/Video
Cable
Audio Jack

AUDIO/VIDEO IN Jacks

Audio/Video
Cable
OR
White
Audio
Plug
Yellow Video Plug
4. Press the PLAY/CAM button to turn
on PLAY mode.
The green indicator lights.
5. Press PLAY.
During playback, use the playback
features described on page 24.
6. Press STOP when you are finished.
Tip: This same connection can be used if you
want to watch what the camcorder is seeing or
recording on the TV screen. Remember to
remove the tape unless you are recording. Just
place the PLAY/CAM button in the CAMERA
mode and press the thumb trigger.
Back of
Mono VCR or
White
TV Monitor
Audio
Plug
AUDIO
IN
VIDEO
IN
Yellow Back of
Stereo VCR or
Video
TV Monitor
Plug
L
AUDIO
IN
R
VIDEO
IN
Y-Adapter*