Download Print this page

HP J9311A Specification page 49

3500 and 3500 yl series

Advertisement

QuickSpecs
Accessory Product Details
HP X131 10G X2 SC LRM
Transceiver (J9144A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LRM
standard, providing 10-
Gigabit connectivity up to
220 m on legacy
multimode fiber.
Electrical characteristics Power consumption
Cabling
Notes
Services
Ports
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
DA - 13282 Worldwide — Version 19 — December 9, 2013
typical
Power consumption
maximum
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length
Fiber type
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Refer to the HP website at
www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Altitude
typical
Power consumption
maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be needed
in some multimode fiber installations);
Maximum distance:
• 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
• 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
• 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
• 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
HP 3500 and 3500 yl Switch Series
2 W
3 W
2m to 10km with 9/125 ìm single-mode cable
Single Mode
3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78 cm)
0.35 lb. (0.16 kg)
X2
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
up to 10,000 ft. (3 km)
3.2 W
4.2 W
for details on
Page 49

Advertisement

loading