Advertisement
QuickSpecs
Accessory Product Details
HP X132 10G SFP+ LC LR
Transceiver (J9151A)
A 10-Gigabit transceiver in
SFP+ form-factor that
supports the 10-Gigabit LR
standard, providing 10-
Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
Notes
Services
DA - 13282 Worldwide — Version 19 — December 9, 2013
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Altitude
typical
Power consumption
maximum
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Maximum distance:
2m-10km with 9/125 µm single-mode cable
Cable length
Fiber type
Conditioning patch cord cables are not supported.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 3500 and 3500 yl Switch Series
LC
1310 nm
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
cm)
0.04 lb. (.02 kg)
SFP+
32°F to 158°F (0°C to 70°C)
0% to 85%, noncondensing
-40°F to 185°F (-40°C to 85°C)
up to 10,000 ft. (3 km)
0.9 W
1 W
2m to 10km
Single Mode
www.hp.com/networking/services
for details on
Page 52
Advertisement
