Table of Contents
Advertisement
IP200 MiniDome In-Ceiling Mount
4.3
Installing the Camera to the Recess Mount
To install the camera to the recess mount, follow these steps:
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
1.
2.
Figure 4.6 Match Connectors
3.
Bosch Security Systems
Route wires on the side of mounting plate with the
crescent shaped cut-out.
Connect the cables according to the instructions in the
IP200 MiniDomes Installation Manual.
Cable out
Attach the camera to the recess mount by removing the
upper housing/bubble from the camera (use the wrench
supplied with the camera), and attaching the camera base
Installation Manual
Installing a Recessed Mount | en
AM18-Q0626 | v1.0 | 2012.09
11
Advertisement
Table of Contents
