Table of Contents
Advertisement
6
en | Installation Overview
3
Installation Overview
The IP200 MiniDome camera comes with the hardware and
installation instructions necessary to mount the camera to a
concrete ceiling.
This following mounting accessory is available :
–
The mount is supplied with two different trim rings and
different tooling hole positions on the sides of the recess
mount. Use the table below to choose the ring and hole
position for your camera.
Trim ring
Ring A
Ring B
The installation should be made by qualified installation
personnel and conform to the National Electrical Code and
applicable local codes.
AM18-Q0626 | v1.0 | 2012.09
In-ceiling mount, used in applications where the camera is
mounted into a recessed ceiling.
Hole
A
B
Installation Manual
IP200 MiniDome In-Ceiling Mount
Camera
NDN-265-PIO
NDC-225-P
NDC-225-PI
NDC-255-P
NDC-265-P
Bosch Security Systems
Advertisement
Table of Contents
