Warning Lamps; Replacing The Battery; Starting The Engine; Automatic Transmission - BMW M3 Owner's Manual

3 series
Hide thumbs Also See for M3:
Table of Contents

Advertisement

Controls
Coupe: convenient closing
Keep pressing the surface, arrow 2, with your
finger.
Convertible: window and convertible
top operation
With the ignition at radio readiness or beyond,
you can open and close the windows and the
convertible top when a remote control is
located inside the vehicle.
Unlocking the trunk lid separately
Press the button on the outside of the trunk lid.
This corresponds to pressing the
If the vehicle detects that a remote con-
trol has been accidentally left inside the
locked vehicle's trunk after the trunk lid is
closed, the lid will reopen. The hazard warning
flashers flash and a signal
Switching on radio readiness
Pressing the Start/Stop button switches on
radio readiness.
Do not depress the brake or the clutch; other-
wise, the engine will start immediately.

Starting the engine

The engine can be started or the ignition can be
switched on when a remote control is inside the
vehicle. It is not necessary to insert a remote
control into the ignition lock, refer to page 53.
Switching off the engine in cars with

automatic transmission

The engine can only be switched off when the
selector lever is in position P, refer to page 55.
To switch the engine off when the selector lever
is in position N, the remote control must be in
the ignition lock.
Malfunction
Local radio waves can interfere with the func-
tion of Comfort Access, for example when a
mobile phone is in the immediate vicinity of the
32
Opening and closing
button.
sounds.<
Online Edition for Part no. 01402918638 - © 02/13 BMW AG
remote control or by when a mobile phone is
being charged in the vehicle.
If this happens, open or close the vehicle via the
buttons on the remote control or using the inte-
grated key. To start the engine afterward, insert
the remote control into the ignition lock.

Warning lamps

The warning lamp in the instrument
cluster lights up when you attempt to
start the engine: the engine cannot
be started. The remote control is not inside the
vehicle or is malfunctioning.
Take the remote control with you inside the
vehicle or have it checked. If necessary, insert
another remote control into the ignition lock.
The warning lamp in the instrument
cluster lights up while the engine is
running: the remote control is no
longer inside the vehicle. After the engine is
switched off, the engine can only be restarted
within approx. 10 seconds.
The indicator lamp in the instrument
cluster lights up: replace the battery
in the remote control.

Replacing the battery

The remote control for Comfort Access con-
tains a battery that will need to be replaced from
time to time.
1.
Take the integrated key out of the remote
control, refer to page 22.
2.
Remove the cover.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents