Volume - BMW M3 Owner's Manual

Connecting a particular mobile phone
The connected mobile phone is denoted with
the following symbol in the radio display:
To change the sequence of mobile phones in
the list:
1. Switch on radio readiness or ignition.
2. Press the
3.
Press the button.
4.
Press the button.
5. Turn the knob on the right until the display
shows the mobile phone whose position in
the list is to be changed.
6.
Press the button repeatedly until
the desired position is reached.
Mobile phone unpairing
1. Switch on radio readiness or ignition.
2. Press the
3.
Press the button.
4.
Press the button.
5. Turn the right knob to show the desired
mobile phone on the radio display.
6.
Press the button.
7.
Press the button to acknowledge
the message displayed.
What to do if...
For information on suitable mobile phones,
refer to page 146.
The mobile phone could not be paired or con-
nected.
> Is Bluetooth activated in the vehicle and in
the mobile phone? Activate Bluetooth in the
vehicle and in the mobile phone.
Online Edition for Part no. 01402918638 - © 02/13 BMW AG
button.
button.
Telephone
> Do the Bluetooth passkeys on the mobile
phone and the vehicle match? Enter the
same passkey on the mobile phone and via
the radio.
> Is the passkey input taking longer than
30 seconds? Repeat the pairing procedure.
> Are too many Bluetooth devices connected
to the mobile phone? If so, delete the con-
nections with other devices on the mobile
phone.
> Is the mobile phone in power economy
mode or does it only have a small amount of
battery charge remaining? Charge the
mobile phone in the snap-in adapter or via a
charging cable.
> Depending on the mobile phone, it may only
be possible to connect one device to the
vehicle. Unpair the connected device from
the vehicle and only pair and connect one
device.
> Delete connection to the mobile phone and,
if necessary, to the radio and try again.
Is the mobile phone no longer responding?
> Switch the mobile phone off and back on
again. Repeat the pairing procedure.
> Is the ambient temperature too high or too
low? Do not subject your mobile phone to
extreme ambient temperatures.
Phone book entries are not displayed, not all of
them are displayed, or they are displayed
incompletely.
> The transfer of phone book entries has not
yet completed.
> In some cases, only the phone book entries
of the mobile phone or the SIM card will be
transferred.
>
It may not be possible to display phone
book entries with special characters.
> The number of phone book entries to be
stored is too high.
> The data volume of the phone book entry is
too great, e.g. due to additionally stored
Communications
149