BMW M3 Owner's Manual page 26

Unlocking the trunk lid
Press the button for about 1 second and
then release it.
The trunk lid opens a short distance, regardless
of whether it was locked or unlocked.
The trunk lid swings back and up when
opened. Ensure that there is sufficient
clearance. To avoid locking yourself out by
accident, do not place the remote control in the
trunk. A previously locked trunk lid is locked
again after closing.
Before and after each trip, check that the trunk
lid has not been inadvertently
Convertible: convenient loading
When you are close to the vehicle, the remote
control for Comfort Access can be used to par-
tially raise the open hardtop for more conve-
nient loading of the trunk.
1. Briefly press the
second, press again and hold until the
retractable hardtop stops in an intermediate
position. The trunk lid opens slightly.
2. Open the trunk lid, press the trunk partition
upward and stow the cargo in the trunk.
3. Press down the trunk partition until it
engages on both sides and close the trunk
lid.
4. Press the button for a longer period to
fold the retractable hardtop back in.
Confirmation signals
You can activate or deactivate the confirmation
signals.
For operating principle, refer to page 77.
1. Switch on the ignition, refer to page 53.
2. Briefly press button 1 in the turn signal/high
beam lever up or down repeatedly until the
Online Edition for Part no. 01402918638 - © 02/13 BMW AG
unlocked.<
button and, within one
Opening and closing
symbol appears in the display, accompa-
nied by the word "SET".
3. Press button 2.
4. Briefly press button 1 in the turn signal/high
beam lever down repeatedly until the
desired symbol appears in the display.
> Confirmation signal during unlocking
>
Confirmation signal during locking
5. Press button 2.
6. Use button 1 to select:
>
The hazard warning flashers are acti-
vated during unlocking/locking.
>
An acoustic signal sounds during
unlocking/locking.
>
The hazard warning flashers are acti-
vated and an acoustic signal sounds
during unlocking/locking.
>
The function is deactivated.
7. Press button 2.
The setting is stored.
Controls
25