BMW M3 Owner's Manual page 155

Communications
Important for voice commands
When issuing voice commands, make sure to:
> Pronounce the commands smoothly and at
normal volume, avoiding excessive empha-
ses and pauses.
> Keep the doors, windows and glass roof
closed to prevent interference from outside
noise.
> Avoid ambient noise in the vehicle while
speaking.
Example: dialing phone numbers
1. Press the button on the steering wheel.
2. {Dial number}
The system replies: {{Please say the num-
ber}}.
3. For example: {123 456 7890}
The system replies: {{123 456 7890.
Continue?}}.
4. {Dial}
The system replies: {{Dialing number}}.
Calling
Dialing phone numbers
1. {Dial number}.
2. Say the phone number.
3. {Dial}.
The connection to the desired subscriber is
established.
Correcting phone number
After the last spoken sequence of digits has
been repeated by the system, you can delete
this sequence of digits.
{Correct number}.
The sequence of digits is deleted.
The command {Correct number} can be
repeated as often as you like.
154
Telephone
Online Edition for Part no. 01402918638 - © 02/13 BMW AG
Deleting phone number
{Delete}.
All digits entered up to this point are deleted.
Voice phone book
A separate voice phone book is needed for
operation using voice commands. Names and
phone numbers of the voice phone book are
independent from the mobile phone memory or
the SIM card memory of the mobile phone. In
this case, phone numbers stored in the mobile
phone or on the SIM card cannot be accessed
by voice or stored in them by voice.
Storing the entry
An entry always consists of a name and a phone
number.
1. {Save name}.
2. Say the name aloud.
Saying the name for the voice phone
book should not take longer than
approx. 2 seconds.
3. Say the phone number after being
prompted to do so by the system.
4. {Save}.
Selecting a phone number of an entry
{Dial name}.
1.
2. Say the name when prompted by the
system.
3. Confirm request: {Yes}
Having entries read aloud
1. {Read phonebook}.
The dialog for reading phone book is
opened.
2. Say {Dial number} after the desired
entry is read.
Redialing
To redial the phone number dialed last:
{Redial}.