Advertisement
REMOTE ROOM APPLICATION
The optional CB12 Connecting Block has a three terminal input strip for
connection of external infrared receivers should you wish to control your
equipment from other rooms.
The terminals are marked V G S. (V = +12V, G = Ground, and S = IR
Signal).
Make connections as shown in the figure below. Run a 3-conductor
cable (24 to 18 gauge wire, stranded or solid) from each remote room
to the VGS terminals of the CB12.
When you use a Hidden Link IR Receiver in a remote room, do not plug
in a power supply or use the "OUT" jack in the CB12, as shown in the
figure below.
You may use more IR receivers, connected in the same manner, up to
a maximum of 12.
HL Series IR Receiver
781ERGPS
DVD
To 120 VAC
(Unswitched)
Emitter
PLACEMENT
The IR receiver should be located so that it is not directly facing a light source
such as lamps or displays (standard, LCD, and Plasma). When mounted near a
display, it should be flush to the display and away from light reflections that may
occur.
WL Series
HL2 IR Receiver
4
1.
Hidden-Link (HL) IR Receiver Kit
DESCRIPTION
The HL Series Kit comes with everything needed for a complete IR repeater
system. With a Xantech IR Kit, equipment can now be concealed for clean
room design. In addition, a centralized IR receiver means there is only one IR
target resulting in improved remote control interaction. Featuring color-coded
connectors, a Xantech IR Kit is now an easy to install, and allows a worry-free
installation.
INCLUDED ITEMS
ITEM A: (1) HL Series IR Receiver
ITEM B: (1) 789-44 Connecting Block
5
Advertisement
