Positioning/Aligning Dvb-T Antenna - Loewe Reference 52 Operating Instructions Manual

Initial installation
Start search Start the automatic station search with OK.
The set now searches for TV and DVB radio stations.
The stations found in the automatic search are divided into
the appropriate station blocks depending on the previously
selected antenna cables (signal sources). Subsequently the
stations can only be re-sorted within these blocks. At the
beginning of the station list you will find the block with
the stations of the preferred signal source.
Any mixed sorting of stations from different signal sources
is only possible with the favourites list.
Age-related You can specify an age limit for your TV set here. DVB
lock broadcasts which have an appropriate age identification
are locked and can only be watched after entering the
access code (see page 44).
Connecting Then the connection and sound component wizard
additional starts which helps you to log in, set and connect video
devices recorders, decoders, a loudspeaker system or a HiFi/AV
amplifier to your TV set. A DVD recorder is already logged
in ex factory.
You can start the connection wizard and the sound
components wizard manually later and add new devices.
Further information is available from page 48 (Connec-
tion wizard) and page 56 (Sound components wizard).
Digital Link If you have registered and connected a recorder in the
Plus connection wizard, the Digital Link Plus transmission
begins at the end of the sound components wizard. If
a Digital Link Plus capable recorder is connected, the
station list of the analogue stations is transmitted to the
external recorder.
You can also call Digital Link Plus under TV menu
nections Digital Link Plus.
Explanations of the DVB-T antenna:
Room
With good reception conditions a room antenna can be
antenna
used for DVB-T (socket ANT2).
Active
Under less favourable reception conditions, it is advisable
antenna
to use an active antenna which has to be set accordingly
in the initial installation or in the TV menu
Antenna DVB
on page 14).
Directional
If the location is outside of the normal transmission
antenna
range then a directional antenna can be used to improve
reception quality.
Connections
Antenna DVB-T (see DVB-T antenna

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align-
ment of the antenna. Ask your dealer to tell you which channels are used
to broadcast the DVB-T stations in your region.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Stations,
 go to the menu line below.
 Select Manual adjustment,
OK call manual adjustment.
Signal source
Select the area in which you want the broadcaster to search here. You can
use the
The signal source is already on DVB-T due to the station
preselection.
Con-
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T
stations, see page 28.
Explanation of the setting possibilities:
Depending on the selected channel and country the as-
Bandwidth
sociated bandwidth will be set automatically.
button to automatically select station by station.
Manual adjustment
SIgnal source DVB-T
Channel E05
Frequency 177.50 MHz
Bandwidth 7 MHz
Name 12 Test
C/N 81
Level 80
BER 0 E-7
Overwrite station
Search
DVB-C DVB-S A
END
INFO
15 -