Alpine IVA-D511RB Owner's Manual page 31

Display Example for Balance/Fader Screen
Adjusting the Fader
A
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
• If an IMPRINT audio processor (PXA-H100) is connected to this unit
and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.)
switch of the IMPRINT audio processor (PXA-H100) to 2.2ch
(3WAY), you cannot adjust the Fader mode. For details, refer to the
Owner's Manual of PXA-H100.
B Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Balance/Fader Directly
C
Touch and move [ ] to a desired setting.
Or touch a desired setting range, and [
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Adjusting Bass/Treble
You can change the bass or treble frequency emphasis to create
your own tonal preference.
Touch the title bar of Bass/Treble to adjust screen.
• Adjustment cannot be performed when Defeat is set to ON.
• If OFF is set in "Changing MultEQ mode" (page 47) when the
IMPRINT audio processor is connected, the list is not displayed.
Setting the Bass level
You can emphasize or weaken the bass frequency.
Touch [ ] or [ ] of Bass Level to select the desired bass level.
Setting range: –7 to +7
Setting the treble level
You can emphasize the treble frequency.
Touch [ ] or [ ] of Treble Level to select the desired treble
level.
Setting range: –7 to +7
Subwoofer On and Off
Touch [ ] or [ ] of Subwoofer to set to ON or OFF.
OFF: Subwoofer output is off.
ON: Subwoofer output is on.
Adjusting the Subwoofer Level
When ON is set in "Subwoofer On and Off ", the item is
displayed.
When an External Audio Processor is connected, the list is not
displayed.
1 Touch the title bar of Subwoofer.
2 Touch [ ] or [ ] of Level to adjust the subwoofer output.
Switching the Subwoofer phase
When ON is set in "Subwoofer On and Off" while the car is
parked, the item is displayed.
The subwoofer output phase is toggled SUBWOOFER NORMAL
(0°) or SUBWOOFER REVERSE (180°).
1 Touch the title bar of Subwoofer.
2 Touch [ ] or [ ] of Phase to select to 0°or 180°.
• When the IMPRINT audio processor is connected, set "Changing
Setting the Subwoofer System
When ON is set in "Subwoofer On and Off" while the car is
parked, the item is displayed.
1 Touch the title bar of Subwoofer.
2 Touch [ ] or [ ] of System to select to System 1 or System 2.
] will move to that
Setting the Subwoofer Channel
When ON is set in "Subwoofer On and Off" while the car is
parked, the item is displayed.
1 Touch the title bar of Subwoofer.
2 Touch [ ] or [ ] of Channel to select to Stereo or Mono
• When the IMPRINT audio processor is connected, set "Changing
Adjusting the Subwoofer Level
When an external audio processor is connected, the list is
displayed.
Touch [ ] or [ ] of Subw. Level to adjust the subwoofer output.
Adjusting Nav. Mix Level
Touch [ ] or [ ] of Nav. Mix Level to adjust the volume of
navigation interruption.
• This adjustment becomes available when Nav. Mix is turned ON in
• The setting navigation interruption is not displayed if an external
• While an External audio processor is connected, this function may
The display change to the Subwoofer Adjusting screen.
Setting range: 0 to 15
The display change to the Subwoofer Adjusting screen.
MultEQ mode" (page 47) to OFF while the car is parked.
The display change to the Subwoofer Adjusting screen.
System 1: Subwoofer level changes according to the main
volume setting.
System 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
The display change to the Subwoofer Adjusting screen.
(monaural).
Stereo: Subwoofer stereo (L/R) output
Mono: Subwoofer monaural output
MultEQ mode" (page 47) to OFF while the car is parked.
Setting range: 0 to 15
Setting range: 0 to 15
"Setting the Navigation Interruption" (page 45).
audio processor not compatible with Nav. Mix is connected.
inoperable when Defeat is set to ON.
29
-EN