Scpi Command Summary - Agilent Technologies E3631A User Manual

Chapter 4 Remote Interface Reference

SCPI Command Summary

SCPI Command Summary

This section summarizes the SCPI (Standard Commands for Programmable
Instruments) commands available to program the power supply over the remote
interface. Refer to the later sections in this chapter for more complete details on each
command.
Throughout this manual, the following conventions are used for SCPI command
syntax.
• Square brackets ([ ]) indicate optional keywords or parameters.
• Braces ({ }) enclose parameters within a command string.
• Triangle brackets (< >) indicate that you must substitute a value or a code for
the enclosed parameter.
• A vertical bar ( | ) separates one of two or more alternative parameters.
4
First-time SCPI users, see
page 104
67