3.4.2.
INITIAL SETTINGS:
After replacing the MAIN P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. PROCEDURES:
Step 1. Setup:
a. Attach the Battery to the unit.
b. Connect the Camera unit and a PC with a USB cable.
c. Turn the power switch to ON.
d. Select the USB mode to "PC" mode, then press the "MENU/SET" button.
Step 2.Execute the Initial Setting:
a. Execute the PC software "PcAppSample.exe".
b. Select Sales Area and click "OK".
c. Click the "Connect", then Model name is displayed.
8