Watchdog Timer Properties - NEC Express5800 320La System Configuration Manual

Watchdog Timer Properties

Monitor OS Stall (Server) - When this item is checked, the watch dog timer on
the mother board in the Agent sends a message to ESMPRO Manager when it
detects that the operating system in the Agent is hung.
Note:
setting takes effect.
Monitor System Hangs (SMB) - Check this box to enable the watch dog timer
to monitor the Agent. If the operating system hangs in the Agent, a timeout
message to is sent to the ESMPRO Manager and the Agent is rebooted.
The watch dog timer sends a signal to the server periodically and waits for a
response. The signal is sent at intervals defined by the Interval field. If the
server doesn't respond in the time period shown in the Timeout field, the server
is assumed to be hung. A message is sent to the ESMPRO Manager and the
Agent is rebooted.
Note:
setting takes effect.
Timeout - The watch dog timer sends a signal to the server and waits for a
response. If the server doesn't respond in the time set here, the server is assumed
to be hung.
Interval - The frequency of the test signals.
Action When Timeout –
None - No action is taken.
NMI/NMI (default) – An error is generated to indicate the operating system
took longer than the allotted time to shutdown. This could indicate that the
operating system is hung.
3-22 ESMPRO Agent for Linux
Your computer must be restarted before this
Your computer must be restarted before this