Stopping Scsi Disk(S) - NEC Express5800 320La System Configuration Manual

Stopping SCSI Disk(s)

Use ftdiskadm to stop a SCSI disk(s) in manual mode.
The following is an example of stopping a SCSI disk(s):
Command action
Command: 1
Command action
Command: 5
[Bring Down]
* Which disk(s)? ['?' for help] => (10.1)t0l5 (see Note 1)
f* Bring down: '(10.1)t0l5 [d0h2c0t0l5]' [y/n] y
<<Confirm the started SCSI disk(s)>>
Notes:
1. To obtain a disk specification method list, enter '?'.
An asterisk * can be specified for TARGET, LUN, serial number, and device name. It is
applicable to all candidates. There are other specification methods for TARGET and LUN -
for example, listing numeric values in brackets [ ] (e.g., [<num1>,<num2>]) and specifying
a range of numeric values (e.g., [<num3>-<num5>]).
2-16 Configuring Linux
1 => SCSI
2 => RAID
3 => Environment
9 Quit
1 Status(All Disks)
2 Status(System Disks)
3 Status(Extended Disks)
4 Bring Up
5 Bring Down
9 <= RETURN