Table of Contents
Advertisement
Chipset Setup,
Continued
Deturbo Mode Set this option to Enabled to enable deturbo mode. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Disabled.
TypeF DMA BufferControl1
TypeF DMA Buffer Control2 These options specify the DMA channel where TypeF buffer control is
implemented. The settings are Disabled, Channel-0, Channel-1, Channel-2, Channel-3,
Channel-5, Channel-6, or Channel-7. The Optimal and Fail-Safe default settings are
Disabled.
Power Interrupt Set this option to Enabled to activate the function of Power Interruption. When
"Enabled", the power of the system will be automatically turned on after a power
interruption (outage). The user does not need to hit the Power-on switch on the case to
turn on the power. The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Disabled.
USB Function
Set this option to Enabled to enable USB (Universal Serial Bus) support. The settings
are Enabled or Disabled. The Optimal and Fail-Safe default settings are Enabled.
USB Keyboard/Mouse Legacy Support Set this option to Enabled to enable support for older keyboards
and mouse devices if the USB Function option is set to Enabled. The settings are
Enabled or Disabled. The Optimal and Fail-Safe defaults are Disabled.
USB Passive Release Enable Set this option to Enabled to enable passive release for USB. The settings
are Enabled or Disabled. The Optimal and Fail-Safe default are Disabled.
------------------------------------------------------------------------------------------------------------------------------------------------
Pentium II Motherboards AMI BIOS Setup -Page
20-
Advertisement
Chapters
Table of Contents
