Lenovo ThinkPad X1 Carbon User Manual page 88

Table 5. Config menu items (continued)
Menu item
Keyboard/Mouse
Display
72
User Guide
Submenu item
TrackPoint
Touch Pad
Fn and Ctrl Key swap
Fn Key Lock
Keyboard Illumination
Control
Boot Display Device
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• ThinkLight Only
• Keyboard backlight Only
• Both
• ThinkPad LCD
• Analog (VGA)
• Digital on ThinkPad
• Digital 1 on dock
• Digital 2 on dock
Comments
Enable or disable the
built-in TrackPoint device.
Note: If you want to use
an external mouse, select
Disabled.
Enable or disable the
built-in touch pad.
Note: If you want to use
an external mouse, select
Disabled.
If you select Enabled, the
Fn key works as the Ctrl
key, and the Ctrl key works
as the Fn key.
Note: Even when Enabled
is selected, you need to
press the Fn key to resume
the computer from sleep
mode to normal operation.
If you select Enabled, you
can press the Fn key once
to keep it in a pressed
condition, and then press
the desired function key.
The action is equivalent to
pressing simultaneously. If
you press the Fn key twice,
the state is locked until you
press the Fn key again.
Enable the ThinkLight
light feature, the keyboard
backlight feature, or both.
After you make a selection,
you can activate the
corresponding feature(s) by
pressing Fn+Space.
Select the display device
that is to be active at boot
time. This selection is
effective for boot time,
password prompt, and
ThinkPad Setup.
Digital on Thinkpad is the
Mini DisplayPort on your
computer.
Digital 1 on dock and
Digital 2 on dock
are DisplayPort or DVI
connectors on a docking
station.