Lenovo ThinkPad X1 Carbon User Manual page 69

1. Place the ball of your finger– that is, the central part of the fingerprint – on the small circle above the
reader. Ensure that the entire top joint of the finger is on the reader.
Note: Your computer might have slight variations from the following illustration.
2. Apply light pressure and swipe your finger across the reader in one smooth motion.
Note: Your computer might have slight variations from the following illustration.
Logging on to the system
After you enroll your fingerprint, log on to the system as follows:
1. Set a power-on password or a hard disk password, or both.
2. Turn your computer off and then on again.
3. When prompted, swipe your finger over the reader.
4. On request, type your power-on password, your hard disk password, or both. The enrolled fingerprint is
now associated with your power-on password, your hard disk password, or both.
53
.
Chapter 4 Security