Table of Contents
Advertisement
iii) Click the letter corresponding to the user to disconnect. The Disconnect dialog box will
appear.
iv) Click OK to disconnect the user. (Type X or press ESC to exit without disconnecting.)
b)
Scan Mode
See 2.2.4.2 Local KVM Configuration - d) Scan Dialog Box for more detail.
c)
PS/2 Keyboard and Mouse Reset
If your PS/2 keyboard or mouse locks up, you may be able to re-establish operation by
issuing a reset command.
i)
Click Commands in the Main dialog box.
ii)
Click Reset PS/2.
iii) Click OK to reset the keyboard and mouse.
iv) Click X to close the message box.
d)
Version Information
To display version information:
i)
Click Commands in the Main dialog box.
ii)
Click Display Versions.
Figure 2.2-30 Disconnect dialog box
Figure 2.2-31 Version dialog box
2-36
Advertisement
Table of Contents
