ProForm 310 Cx Bike Manual page 11

11. Attach the Backrest (13) to the Seat Carriage
(11) with five M8 x 16mm Screws (60) and five
M8 Split Washers (61).
Tip: It may be helpful to adjust the seat dur-
ing this step. See HOW TO ADJUST THE
SEAT on page 13.
12. Identify and orient the Pulse Bar (12) so that the
Pulse Grips (41) face upward.
Tip: Avoid pinching the Pulse Bar Pulse Wire
(92). While a second person holds the Pulse Bar
(12), attach the Pulse Bar to the Seat Carriage
(11) with two M8 x 45mm Screws (63) and two
M8 Split Washers (61).
Tip: It may be helpful to adjust the seat dur-
ing this step. See HOW TO ADJUST THE
SEAT on page 13.
11
11
61
60
12
41
11
12
61
63
92
11
13
Avoid pinching
the Pulse Bar
Pulse Wire (92)
41