Activating/Deactivating The Pilot Tone Evaluation; Activating/Deactivating The Lock Mode; Exiting The Operating Menu - Sennheiser EK 500 G2 Bedienungsanweisung

Activating/deactivating the pilot tone
evaluation –
Via the "PILOT" menu, you can activate or deactivate the
pilot tone evaluation.
The pilot tone supports the receiver's squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone, and is
thus able to identify the signal of the matching transmitter
and mute all others.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the EK 500 G2 receiver with
a transmitter of the first generation. However, when
combining units, please observe the following:
With an ew 500 G2 transmitter and the ew 500 G2
receiver:
Activate the pilot tone function with both transmitter
and receiver.
With an ew 500 transmitter and the ew 500 G2 receiver or
vice versa:
Deactivate the pilot tone function with the ew 500 G2
transmitter or receiver.
Activating/deactivating the lock mode –
Via the "LOCK" menu, you can activate or deactivate the
lock mode.
The lock mode prevents that the receiver is accidentally
programmed or switched off during operation. The lock
mode icon
activated.
To deactivate the lock mode, first press the
then press the
you confirm your selection by pressing the
buttons can be operated as usual.
Exiting the operating menu –
Via the "EXIT" menu, you can exit the operating menu and
return to the standard display.
PILOT
on the display indicates that the lock mode is
/ rocker button to select "LOC.OFF". If
LOCK
SET button and
SET button, the
EXIT
25