Overview Of Operating Controls; Sr 300 Iem G2 Stereo Transmitter - Sennheiser EK 300 IEM G2 Instructions For Use Manual

Overview of operating controls

SR 300 IEM G2 stereo transmitter

Operating controls
Headphone output (PHONES),
¼" (6.3 mm) jack socket
Headphone volume control (VOL)
Graphic display, backlit
/ rocker button, backlit
SET button, backlit
ON button, backlit
(serves as the ESC (cancel) key in the
operating menu)
Cable grip for power supply DC cable
DC socket for connection of mains unit (DC IN)
Audio input (AF IN BAL/UNBAL),
XLR-3F socket (left and MONO)
Audio input (AF IN BAL/UNBAL),
XLR-3F socket (right)
Service interface (DATA)
Type plate
Antenna output (ANT), BNC socket
44
Graphic display panel
Display for the current channel bank "1...8, U"
Display for the current channel number "1...12"
"B.CH" – abbreviation for channel bank and
channel number
Alphanumeric display
"MHz" – appears when the frequency is displayed
Level display for audio signal "AF I" (left and MONO),
with "PEAK" warning
Level display for audio signal "AF II" (right),
with "PEAK" warning
Lock mode icon
(lock mode is activated)
Note:
For further illustrations and examples of the different
standard displays, please refer to the section
"Selecting the standard display" on page 65.