Overview Of Operating Controls - Sennheiser EM500 Instructions For Use Manual

Overview of operating controls

Operating controls
Headphone output (PHONES),
¼" (6.3 mm) jack socket
Headphone volume control (VOL)
Graphic display, backlit
/ rocker button, backlit
SET button, backlit
ON button, backlit
(serves as the ESC (cancel) key in the
operating menu)
Cable grip for power supply DC cable
DC socket for connection of mains unit (DC IN)
Audio output (AF OUT BAL),
XLR-3M socket, balanced
Audio output (AF OUT UNBAL),
¼" (6.3 mm) jack socket , unbalanced
Service interface (DATA)
Antenna input II (ANT II), BNC socket
Type plate
Antenna input I (ANT I), BNC socket
Graphic display panel
Display for the current channel bank "1...8, U"
Display for the current channel number "1...20"
"B.CH" – abbreviation for channel bank and
channel number
Alphanumeric display
"MHz" – appears when the frequency is displayed
Diversity display
(antenna I or antenna II active)
"PILOT" display
(pilot tone evaluation is activated)
Level display for received RF signal "RF"
Level display for received audio signal "AF",
with "PEAK" warning
4-step transmitter battery status display
Lock mode icon
(lock mode is activated)
Note:
For further illustrations and examples of the
different standard displays, please refer to the
section "Selecting the standard display" on
page 22.
7