Recommended Temperature Probes; Ordering Information - Fluke 572-2 Technical Data

Recommended temperature probes

Probe Usage
80PK-1 The general purpose bead probe is for quick, accurate surface temperatures and air temperatures within ducts,
vent temperatures.
80PK-8 Pipe clamp probes (2) are essential for tracking continuously changing temperature differentials on hydronic
tubing and pipe loops, and good for quick, accurate refrigerant temperatures.
80PK-9 The insulation-piercing probe provides a sharp tip to pierce pipe insulation and flat probe tip for good surface
thermal contact, air temperatures within ducts, and vent temperatures.
80PK-11 Flexible cuff thermocouple temperature probe is a convenient way to attach a thermocouple to a pipe while
keeping hands free.
80PK-25 The piercing probe is the most versatile option. Good for checking air temperature in ducts, surface temperature
under carpets/pads, liquids, thermometer wells, vent temperatures, and for penetrating pipe insulation.
80PK-26 The tapered probe is a good general-purpose gas and surface probe, with a good length and low mass tip casing
for faster reaction to surface and air temperatures.

Ordering information

572-2 Infrared Thermometer
Includes
Infrared thermometer with contact thermometer
capabilities, K-type thermocouple bead probe, USB
2.0 computer interface cable, FlukeView
Documenting Software, hard carrying case, getting
started guide (print) and user's manual (CD).
3 Fluke Corporation 572-2 Infrared Thermometer
Forms
®
Fluke. The Most Trusted Tools
in the World.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2013 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 6/2013 6000240A_EN
Modification of this document is not permitted
without written permission from Fluke Corporation.