Changing Of All Data Settings With Personalized Code - Fluke 1625 User Manual

Turning the central rotary switch for a short moment deletes the line
compensation again.
Figure 20. Compensation of Measuring Lead Resistance

Changing of All Data Settings with Personalized CODE

With this function (FM, UM-Limit, Limit, beeper, ratio, R*, F*) limit- and set
values can be programmed which keeps them memorized even if the instru-
ment is switched ON/OFF. This feature enables the operator to create an in-
strument set-up with customer defined settings according to the specific need.
Settings can only be made in the respective functions:
1625 EARTH / GROUND TESTER
START
H/C2
TEST
DISPLAY
S/P2
MENU
AC
Resistance
Earth/Ground Resistance 300 k 300 k DC Low Resistance 3k
RA R R
2
POLE
4 POLE
3 2 POLE
POLE
4 POLE 4 POLE
CHANGE
ES/P1
ITEM 3
POLE
OFF
SELECT E /C1
Earth/Ground Tester
Procedure of Measurements
edw026.eps
51