Extended Configuration - Hitachi GD8000 User Manual

User guide
Table of Contents

Advertisement

GD8000 User Guide
Field
Setting
d
Stealth Mode
ISABLEd
Enabled
LED
Off
O
N
Fan
Off
O
N
Audio
Off
O
N
System Beeps
Off
O
N
Display Brightness Off
O
N
Radio
Off
O
N

Extended Configuration

Field
Core Multi-Processing
Virtualization Technology
Battery Low Warning
Beep
Secure HDD Support
Dock USB Port
Bluetooth Wakeup
General Dynamics Itronix | 72-0137-003
Desription
Enable or disable stealth mode. If disabled, the computer functions normally and the
options listed below are not accessible.
Off: LEDs are disabled
On: LEDs function normally
The fan is disabled. Heat management is then controlled solely through throttling.
The fan functions normally
Off: Volume is set to 0 across suspend/resume and boot. Use the existing audio function
keys to adjust volume.
On: Audio is preserved across suspend/resume and boot. The default volume level is set
to mid-range.
Off: Beeps are disabled during the boot up or resume process
On: Beeps are heard during POST
Off: Brightness is set to 0 across suspend, resume and boot.
brightness gradually.
On: Display brightness is preserved across suspend/resume and boot. It is restored to
default when the brightness level is set at 0. The default level is mid-range.
Off: All wireless devices are set to off during a suspend/resume or boot. The
OFF Switch
can be used to manually turn the radios on or off.
On: The radio on/off switch functions normally and radio device power states are held
though suspend/resume and boot.
Setting
Description
Disabled
When enabled the CPU cores function and process data independently for superior
E
performance. When disabled one of the CPU cores is disabled.
NABLEd
d
When enabled, a virtual machine monitor (VMM) can leverage the computer's hard-
ISABLEd
ware resources for multiple virtual machines (VM).
Enabled
Disabled
The system will sound 3 beeps every 10 seconds when battery capacity drops below
E
7%.
NABLEd
d
If secure HDD is enabled the system will disable standby mode (S3) and will maintain
ISABLEd
HDD power when the system is restarted.
Enabled
USB 2.0
Set this to USB 1.1 if you are using a non-standard dock.
USB 1.1
d
If enabled, the Bluetooth radio will wake up the system.
ISABLEd
Enabled
FN+F6
decreases brightness gradually.
Customizing Your BIOS
FN+F7
increases display
Radio ON/

Advertisement

Table of Contents
loading

Table of Contents