Care And Cleaning; Troubleshooting - Zanussi ZEI6240FBA User Manual

Heat
setting
4-5 Cook larger quantities of food, stews and
soups
6-7 Gentle fry: escalope, veal cordon bleu, cut-
lets, rissoles, sausages, liver, roux, eggs,
pancakes, doughnuts
7-8 Heavy fry, hash browns, loin steaks, steaks
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ce-
ramic cause no effect on how the appli-
ance operates.
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-

Troubleshooting

Problem
You cannot activate the appliance
or operate it.
The appliance deactivates.
The residual heat indicator does
not come on.
The sensor fields become hot.
comes on.
8
Use to:
Possible cause
You touched 2 or more sensor
fields at the same time.
There is water or fat stains on the
control panel.
You put something on the sensor
field .
The cooking zone is not hot be-
cause it operated only for a short
time.
The cookware is too large or you
put it too near to the controls.
The Automatic Switch Off oper-
ates.
Time
60-150 Up to 3 l liquid plus ingredients
min
as nec- Turn halfway through
essary
5-15 min Turn halfway through
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is suffi-
ciently cool: limescale rings , water
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and
some detergent.
3. At the end rub the appliance dry with a
clean cloth.
Activate the appliance again and
set the heat setting in less than 10
seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sen-
sor field.
If the cooking zone operated suffi-
ciently long to be hot, speak to the
service centre.
Put large cookware on the rear
cooking zones if necessary.
Deactivate the appliance and acti-
vate it again.
Hints
Remedy
www.zanussi.com