GBC PF3200 Operation Manual page 12

AUTO MODE (CONT.)
Note: If you accidentally remove or
drop the cover sheet during the
clamping station return to the nipping
station, the control panel will show
"COVER?". At this moment, you have
to place the cover on the nipping
station and press "START" button to
recover the process.
Having completed one bound book, the
clamp will automatically open and display
"UNLOAD" so that you can remove the
finished book from the right end.
Meanwhile, the LED display of control
panel will count once for the total binding
amount as shown. The PF-3200 will flash
"LOAD BOOK" display.
5. Place the same thickness of book block
onto the clamp as the label instructions
on the clamp. The clamp station will
automatically clamp down the book
block and move to the left. Repeat step
3 to 4 for more books in "AUTO"
operation.
12
COVER ?
STAND BY
CLEAR
NOTCH READY
MANUAL COUNTER
CLOSE
FUNCTION
AUTO
START
PAD OPEN
BIND
STAND BY
CLEAR
NOTCH READY
MANUAL COUNTER
CLOSE
FUNCTION
AUTO
PAD OPEN
START
UNLOAD
STAND BY
CLEAR
NOTCH
READY
MANUAL COUNTER
CLOSE
FUNCTION
AUTO
START
PAD
OPEN
2
STAND BY
CLEAR
NOTCH
READY
MANUAL COUNTER
CLOSE
FUNCTION AUTO
START
PAD
OPEN
Figure 8