Troubleshooting - Ikegami IK-H750V User Manual

Troubleshooting

Power LED is dark.
No picture.
OSD, "check RGB
( CVBS, SVIDEO)"
is displayed on the
screen.
Screen looks to be run
down.
Screen is not clear.
Display is unstable and
trembling.
26 - English
Check the power connection.
(Refer to page 4)
Check the signal cable or signal Source.
(Refer to page 4)
.
Perform Auto_config
Remove attaches to the signal line
(Video extension cable and others)
and switch on.
Perform Auto-config.
Adjust clock and PHASE.
Check the resolution and frequency of
computer and video card, and set up
again refer to the current monitor
mode and standard signal mode table.
Color is irregular.
Double images or
'ghosts'.
Picture is dark.
Picture is biased or cut
or too wide.
Power LED turns into
Green blinking.
NO SOUND
Adjust COLOR at User Mode in OSD Color
Menu.
Check the resolution and frequency of
computer and video card, and set up
again in reference to the current monitor
mode and standard signal mode table.
Adjust COLOR at User Mode in OSD Color
Menu.
Perform Auto-Config.
Monitor is in DPMS mode.
Check the voice signal connection code or
adjust volume.
English - 27