Specification; Troubleshooting - Ikegami IK-H550V User Manual

Specification

Model
Type
Screen Size
Maximum Resolution
Pixel Range
Display Colors
LCD
Contrast Ratio
Panel
Viewing Angle
Response Time
Luminance
Horizontal Frequency
Synchro
nization
Vertical Frequency
Maximum
Power
Consumption
Power Saving Mode
Control key
Front Part
Input
Input
Signal
Connector
IBM
Compati
bility
Video
Power Supply
Wall Mount
Safety
Safety Standard
Standard
EMI
& EMI
Size and Weight
Dimension
24 - English
IK-H550V(B15AC)
Amorphous active matrix super TFT LCD
38.1cm (Diagonal)
1024 X 768 @ 75 Hz
0.297 mm X 0.297 mm
16.2M Color
300 : 1
70° / 70° / 55° / 60° (Left / Right / Up / Down)
25 msec
250 cd/m
60kHz (Max.)
75 Hz (Max.)
40W
Under 3W
SOURCE, MENU/ EXIT, SELECT, POWER,
, AUTO
-/ , +/
Video : Analog RGB(0.714Vpp)75ohm,
Composite in (BNC),S-VHS in
15-pin Mini D-sub, Stereo, S-VHS, BNC *1
VGA,SVGA,XGA
Normal&Ergonomic Modes
NTSC/PAL standard
Input : 100-240Vac (50/60 Hz), 0.6A
VESA Standard
UL / C-UL
FCC, CE
352 156 369/ 4.1kg

Troubleshooting

Power LED is dark.
No picture.
OSD, "check RGB
( CVBS, SVIDEO)"
is displayed on the
screen.
Screen looks to be run
down.
Screen is not clear.
Display is unstable and
trembling.
Check the power connection.
(Refer to page 4)
Check the signal cable or signal Source.
(Refer to page 4)
.
Perform Auto_config
Remove attaches to the signal line
(Video extension cable and others)
and switch on.
Perform Auto-config.
Adjust clock and PHASE.
Check the resolution and frequency of
computer and video card, and set up
again refer to the current monitor
mode and standard signal mode table.
English - 25