Table of Contents
Advertisement
3
4
5
6
7
8
68
CHAPTER 5: Upgrading Your Computer
Remove the screw that secures the front I/O assembly
to the computer, then remove the I/O assembly.
Remove the screw that secures the front I/O panel board
to the computer, then remove the I/O panel board by
pushing it toward the back of the computer.
Disconnect the cable from the old I/O panel board and
connect it to the new I/O panel board.
Insert the new I/O panel board into the computer, then
replace the screw.
Place the front I/O assembly onto the computer, then
replace the screw.
Replace the front bezel by following the instructions in
"Replacing the front bezel" on page
side panel by following the instructions in
side panel" on page
Screw
50, then replace the
50.
Screw
"Replacing the
Advertisement
Table of Contents
