Table of Contents
Advertisement
9
10
Adding or replacing an optical
disc drive
To add or replace an optical disc drive:
1
2
3
www.gateway.com
Turn on your computer. Windows starts and the
Windows desktop appears.
Click
(Start), right-click Computer, then click
Properties. The amount of memory in your computer
is displayed.
Remove the side panel by following the instructions in
"Removing the side panel" on page
Remove the front bezel by following the instructions in
"Removing the front bezel" on page
Important
The color and shape of your replacement drive's front cover may
vary from your original drive.
If you are installing a new drive, slide the drive release
latch toward the back of the computer, then go to Step 7.
- OR -
If you are replacing an existing drive, disconnect the
cables from the drive, noting their locations and
orientation. You will reconnect the cables after you
install the new drive.
47.
49.
53
Advertisement
Table of Contents
