Connecting Your Printer To A Macintosh Computer (Okipage 4M Only) - Oki OKIPAGE 4m Read Me First

Connecting Your Printer to a Macintosh
Computer (OKIPAGE 4m only)
Make sure your printer is not plugged in and your
computer is turned off.
1. Plug the supplied serial interface cable from your
computer into the serial socket (1) in the printer.
2. Plug the other end of this cable into either the modem
port or the printer port on the Macintosh.
Read Me First
1
3. Plug the power cable into the printer, then into a nearby
earthed outlet.
4. Switch the printer on.
The ready light comes on.
13