Remote Management; Chapter 17 Remote Management; Overview; What You Can Do In This Chapter - ZyXEL Communications NBG4115 User Manual

17.1 Overview

This chapter provides information on the Remote Management screens.
Remote management allows you to determine which services/protocols can access which NBG4115
interface (if any) from which computers.
You may manage your NBG4115 from a remote location via:
• LAN only

17.1.1 What You Can Do in this Chapter

Use the WWW screen
settings.

17.1.2 What You Need To Know

The following terms and concepts may help as you read through this chapter.
Remote Management Limitations
Remote management over LAN or WAN will not work when:
You have disabled that service in one of the remote management screens.
1
The IP address in the Secured Client IP Address field does not match the client IP address. If it
2
does not match, the NBG4115 will disconnect the session immediately.
There is already another remote management session with an equal or higher priority running. You
3
may only have one remote management session running at one time.
There is a firewall rule that blocks it.
4
Remote Management and NAT
When NAT is enabled:
• Use the NBG4115's WAN IP address when configuring from the WAN.
• Use the NBG4115's LAN IP address when configuring from the LAN.
NBG4115 User's Guide
C
HAPTER

Remote Management

• LAN and WAN
(Section 17.2 on page 155) to change your NBG4115's World Wide Web
1 7
154