Change Log Settings - Gateway WBR-100 Installation Manual

Chapter 4: Advanced Features and Configuration
2
In the Firewall section, the
is selected (default). We recommend that you enable this security feature
to prevent Denial of Service attacks from overloading your Internet
connection and making it unavailable.
Set the Threshold to match the bandwidth of your Internet connection
(check with your ISP).
3
In the Options area, click to select any of the following check boxes:
■
■
■
■
4
Click
window to return to the Advanced Features/Configuration window.

Change log settings

The Logs window lets you request that several logs be kept which record
connections, access records, and DoS attacks. You can e-mail the logs to
designated recipients at specified intervals.
52
Respond to ICMP (ping) on WAN interface -
responds to pings from sources on the Internet. Not enabling this
option provides a slight increase in security.
If enabled, your router allows IPSec connections. IPSec is
Allow IPsec -
a protocol used for VPN (Virtual Private Networking) connections to
increase security.
If enabled, your router allows PPTP (Point to Point
Allow PPTP -
Tunneling Protocol) connections. PPTP is a protocol used for VPN
(Virtual Private Networking) connections to increase security.
If enabled, your router allows L2TP (a security protocol
Allow L2TP -
developed by Cisco) connections. L2TP is a protocol used for VPN
(Virtual Private Networking) connections to increase security.
to save your entries or
Save
www.gateway.com
Enable DoS (Denial of Service) Firewall
If enabled, your router
to remove your entries. Close the
Cancel
check box