Back - Gateway WBR-100 Installation Manual

Chapter 1: Introduction

Back

8
Power connection
LAN Ports
Connector/control Description
Power connection Plug the AC adapter into this connection
and plug the power cord into the AC
adapter. Use only the AC adapter and
power cord that came with the wireless
router. Use of any other AC adapter or
power cord may damage your router and
void the warranty.
Reset switch Press the reset button to return all
configuration settings to the default
settings.
WAN port Connect the DSL or cable modem to this
RJ-45 Ethernet port.
LAN ports Connect a computer, hub, or switch to
these RJ-45 Ethernet ports.
Antenna
WAN Port
Reset switch
www.gateway.com